Chemical

OIL VISCOSITY STABILIZER

OIL VISCOSITY STABILIZER is an additive for increasing oil pressure and reducing oil consumption in worn engines. Increases compression, reduces noises during hydro-compensator operation, prevents formation of carbon deposits in the combustion chamber, reduces oil consumption due to increased viscosity index, forms a reliable lubricating film on the surfaces of rubbing parts, prevents formation of carbon deposits, increases engine life, mixable with all types of oils. Recommended for engines with medium and heavy wear, or when using low-quality oil. Application: add the contents to engine oil, preferably at engine operating temperature. The content of one container is sufficient for oil systems with the volume of up to 5 litres.


MOTOR FLUSH 10 MIN

MOTOR FLUSH 10 MIN is used for cleaning the channels of the lubrication system and internal engine cavities from deposits of soot and varnish. It cleans the oil system and the filter screens of the oil pumps. Restores mobility of piston rings and compression rings, increases and equalizes compression in cylinders. During flushing it ensures reliable lubrication, prevents wearing of engine parts. Suitable for cleaning of all petrol and diesel engines with or without a catalyst, turbo-supercharged. Regular use of the product helps to keep the lubrication system clean, contributes to long-term preservation of the service properties of the engine oil in the normal range and increases the life of the engine as a whole. Mixed with all mineral and synthetic oils. Application: Fill into old engine oil before the oil change (at engine operating temperature). Let the engine idle for 10 minutes, drain the used oil, change the filter and add fresh oil into the engine. One container is sufficient for a lubrication system with a capacity of up to 6 litres.


WINDSCREEN WASHER CONCENTRATE is a highly concentrated, aromatic cleaner for adding to the washer tank. Quickly and effectively removes various dirt, insect deposits, oil and silicone residues. Ensures crystal clear visibility. Does not dissolve lacquer and rubber, reduces wear and tear of the brushes. Application: squeeze the contents into a dispenser and pour into the washer reservoir. Dosage 1:100. One dose is enough for 5 litres of water.


Carburetor Cleaner

Carburetor Cleaner is aerosol formulation, which effectively restores carburetor specifications without disassembling, сleans dirt deposits on the body, throttle. It provides effective cleaning of the idling electromagnetic valve, air and fuel jets, float chamber, needle valve, economizer and econostat from pitch and lacquer depositions. Application: stop engine and let it get cold. Take away air filter. Spray the product into the air intake. Run the engine at idle. Then with engine running rinse off loosened contaminants by spraying again with product. Install air filter back and if necessary, adjust ratio of gas mixture components. After cleaning process, if it is necessary, the air filter could be replaced.


RADIATOR STOP LEAK is a coolant leak remover (for up to 10 litres of system). Eliminates leaks, permanently and reliably seals cracks and minor damages in pipes and joints. Directions for use: shake the product well! Warm the engine up to an operating temperature of 90℃. Pour the solution into the radiator tank (the engine should be switched off), start the engine and let it idle for 5-10 min with the passenger compartment heating on. It is applicable to all types of antifreeze and radiators.


RADIATOR FLUSH

RADIATOR FLUSH is a rust remover, scale remover etc. It has anti-corrosive properties. Does not contain acids and alkalis, restores permeability of engine cooling system channels. Recommended for all cooling systems. Usage: add the content of the bottle into the cooling system, switch on the heating and idle the engine for 10-30 minutes. Drain the liquid and fill the radiator with new coolant. Sufficient for systems up to 10 litres. Storage: Store in a dry, ventilated area. Keep out of the reach of children! Shelf life: 5 years from date of manufacture. Date of manufacture: see on packaging.


SILICONE SPRAY

SILICONE SPRAY is an insulating, anti-friction and protective agent free from mineral oil and grease. It is intended for the lubrication of plastic, rubber, metal, glass and other surfaces. Keeps elasticity and reduces wear of rubber seals, prevents squeaking and freezing in winter time. Prevents locks, doors and windows from jamming. Prevents the rubber seals from sticking to metal and the seals from rubbing paint on the adjoining panel. Penetrates into small holes, leaving no smudges or sticky residues. Effectively lubricates metal-to-plastic joints and eliminates squeaks and crackling that occur during vehicle operation. Protects and restores the gloss of surfaces. Resists temperatures from -45°C to +200°C. Directions for use: Shake the can thoroughly before use. Spray the product onto the surface from a distance of 15-20 cm. If necessary, wipe the product with a dry clean cloth.


TEXTILE FOAM CLEANER

TEXTILE FOAM CLEANER is a highly effective cleaning agent designed to remove various dirt and stains from car upholstery, furniture, carpets, fabrics, velour and other textile and plastic surfaces in the car interior. Restores the natural colour, renews the appearance, lifts the nap and neutralises unpleasant odours. Chemically neutral to rubber, lacquer and plastics. Prevents re-pollution due to antistatic properties. Use: Vacuum the interior upholstery first. Shake the can thoroughly, apply the foam cleaner to the soiled area and leave to soak in for some time. Clean dirt with a brush and vacuum again.


BRAKE & PARTS CLEANER

BRAKE & PARTS CLEANER cleans brake system parts (discs, drums, pads, calipers, cylinders) and clutch parts quickly and effectively. It removes oils, grease, brake fluid, tar, resin, fresh paint and glue. It is highly volatile, does not leave traces on parts. Does not damage joints and does not destroy gaskets. Reaches the hardest-to-reach places. How to use: Shake can thoroughly before use. Spray liberally onto the parts to be cleaned from the distance of 10-15 cm. Allow the product to dissolve the dirt and evaporate. Repeat cleaning if necessary.


DASHBOARD POLISH

DASHBOARD POLISH is used to protect car interior plastics against dirt and ageing. Has anti-static properties. Provides glossy coating for rubber and plastic products. Forms a protective barrier against fading, drying out, the negative effects of UV rays and the environment. Use at an air temperature of +15 to +25 °C. Shake can thoroughly before use.